Flinken Tile Adhesive

Flinken Tile Adhesive

FLINKEN Tile Adhesive is high bonding ready to use tile adhesive with all general purpose tiling. FLINKEN Tile Adhesive is a premixed of high strength ordinary portland cement (OPC), well graded silica sand, hydroxypropyl methyl cellulose and modified polymer. The product is applicable for interior and exterior installation of ceramic tiles, mosaics, marbles and natural stones.

Product Description

 
ADVANTAGES
 
  • Simple to use. Just mixed with water.
  • High bonding strength.
  • Hardens without appreciable shrinkage attaining a good resistance.
  • Weather resistance and high durability.
 
MIXING GUIDE
 
1. Mix one bag (40kg) of FLINKEN Tile Adhesive with approximately 11-11.5 L of clean water.
2. Mix continuously 3-5 minutes until a uniform paste is achieved and ensure the mix is from lumps.
3. Placing should be completed within 30 minutes after start mixing.
 
THE ADHESIVE SPECIFICATIONS
 
Form
Powder
 
Appearance
Grey
 
Filler Auxiliaries
Graded Silica Sand Additive to enhance cohensiveness, workability, spreadability and water retention ability
 
Water Powder Ratio
0.17-0.19
 
Wet Powder Ratio
1850-1950kg/m3
 
Dry Density
1700-1850kg/m3
 
Compressive Strength
Above 5N/nm2
 
Bond Strength
Above 0.7N/nm2
 
Volume(m3)
0.025m3
 
Recommended Thickness
3mm/layer
 
Coverage Volume(m2)
8m2
 
Setting Time
120minutes