Flinken Plastering

Flinken Plastering

FLINKEN PLASTERING mix is produced according to the requirement of BS EN 998-1; incorporating standardized binder, well graded silica sand, water retention ability additive for all type of brick and block rendering.

Product Description

 
ADVANTAGES
 
  • Economical-saves time and money.
  • Premixed to ensure good consistent quality. Hairline crack reduced.
  • Simple to use. No gauging of materials. Just add water.
  • Highly workability buttery mix obtained every time.
  • Reduce the risk of efflorescence and bleeding in cement.
 
MIXING GUIDE
 
1. Mix one bag (40kg) of FLINKEN PLASTERING with approximately 8-9.2 litres of clean water.
2. Mix continuously 3-5 minutes until a uniform paste is achieved and ensure the mix is from lumps.
3. Placing should be completed within 60 minutes after start of mixing.
 
TECHNICAL DATA
 
Appearance
Grey
 
Binder
Ordinary Portland Cement (OPC)
 
Filler Material
Graded Silica Sand (<2mm size)
 
Auxiliaries
Additives to improve open time and adhesion
 
Wet Powder Ratio
0.23-0.25 (8-9.2litre)
 
Wet Density
1700-1860kg/m3
 
Air Content
15%
 
Flexural Strength
7.2N/mm2
 
Compressive Strength
43.5N/mm2
 
Adhesion Strength
1.32N/mm2
 
Capillary Water Absorption
0.24kg/m2 .min0.5
 
Pot Life
Up to 60 minutes
 
Recommended Thickness
10-15mm
 
Coverage (approximation)
2.7m2
 
Shelf Life*
12 months