Flinken Skim Coat

Flinken Skim Coat

FLINKEN SKIMCOAT mortar is suitable for internal and external wall finishing. The finishing is fine and smooth.

Product Description

 
ADVANTAGES
 
  • Good workability.
  • Consistent quality.
  • Good bonding with concrete surface.
  • Pre-packed for convenience in handling, mixing and application.
 
MIXING GUIDE
 
1. Mix one bag (25kg) of FLINKEN SKIMCOAT with approximately 8-9 litres of clean water.
2. Mix consistently by using power mixer and mix continuously 3-5 minutes until a uniform paste obtained.
3. Placing should be completed within 30 minutes after start of mixing.
 
TECHNICAL DATA
 
Appearance
Grey
 
Binder
Ordinary Portland Cement(OPC)
 
Filler Material
Calcium Carbonate (325mesh)
 
Auxiliaries
Formulated polymer to improve adhesion
 
Wet Powder Ratio
0.32-0.36 (8-9litre)
 
Wet Density
1700kg/m3
 
Packaging
25kg
 
Flexural Strength
3.5N/nm2
 
Compressive Strength
13N/nm2
 
Adhesion Strength
1.0N/nm2
 
Capillary Water Absorption
0.24kg/m2 .min0.5
 
Pot Life
Up to 60 minutes
 
Recommended Thickness
1-2mm
 
Coverage (approximation)
Approximately 0.8m2 per kg (1mm thickness)
 
Shelf Life*
12 months