ZinPlus

ZinPlus

ZinPlus which is applicable to ZinPlus, ZinSpan, ZinEverroof and ZinCurve, is created with its astonishing design ad multiple advatages. Its extra double layer of Expanded Polyethylene Sheet (E.P.E.) and Aluminium Sheet (A.F.) has a proven remarks of creating cooler admosphere and reducing raindrop noises. A greater lighting effect is an added advantage as the aluminium sheet serves to reflect lighting flares.
Polyethylene (P.E.) is a thermal plastic material which can be recycled. Polyethylene foam is manufactured without the use of ozone depleting chlorofluorocarbons (CFC's) or hydrochorofluoroca

Product Description

Suitable For
 
  • Apartments
  • Bungalows
  • Factory Buildings
  • Hostels
  • Housing Projects
  • Multi-Purpose Halls
  • Quarters
  • School Buildings
 
Benefits
 
  • Strong heat resistant system
  • Reduce raindrop noise
  • Classy look and increase lighting system
  • Save extra labour cost
  • Save insulation plate
 
Sectional dimension
 
TOLERANCES : Length: 0-10mm | Width: +/-3mm | Thickness: +/-0.03mm
 

Specifications
 
Material Used
 
  1. Polyethylene Foam (PE) : Thickness 2.5mm - 4.0mm
  2. Aluminium Film (AF) : 25 macron
  3. Adhesive : Indissoluble Synthetic Rubber Glue
 
Production Process
 
Production Process
 
Profile Diagram
 
Profile Diagram
 

Installation
 
ZinPlus is pierce-fixed to timber or steel supports using a power drill. This means that fastener screws pass through the sheeting. See the diagram below to understand how to install each fastener screw with the accurate side lapping of roofing sheets.
 
Installation
 
CREST FIXING
 
To maximise roof water tightness, always place screws through the crests. Always drive the screws perpendicular to the sheeting, and in the centre of the corrugation or rib.  
 
FASTENERS
 
To match the performance of ZinPlus, the fastener must conform to AS 3566 Class 3
FASTENERS
 
CUTTING
 
Before using a power saw with a metal cutting blade. ZinPlus profile coloured surface must be positioned facing the ground. No hot particles or debris allow to come into contact with the ZinPlus profile.
 
CLEANING
 
To prevent premature corrosion at the completion of each day ensure the sheeting area is cleared of all debris, including nais, rivets, rags and all cutting or drilling filings.
 
CAUTION
 
Green timber should not come into contact with EnvioSeries® pre-painted steel, due to acidic substances in the timber which have a corrosive effect on the coating.
 
TURNING OF SHEETING ENDS
 
It is common practice to overlap sheets into gutters by 50mm when the roof pitch is 25 degrees or in extreme weather areas. The pans of the sheets should be turned down at lower ends and turned up at upper ends.
 

Material Options
 
ZinPlus profile is available in an attractive range of colours in EnvioSeries® pre-painted steel and in unpainted GaluZinc® coated steel.
 
 
GaluZinc® stands for aluminium and zinc, bonded in almost equal amounts to coat the steel sheet with a silvery spangle, composed of aluminium (55%), zinc (43.4%) and a touch of silicon (1.6%). GaluZinc® steel delivers outstanding anti-corrosion performance.
 
 
EnvioPrime® steel sheet is precisely developed to provide subtle performance for ZinEverroof profile with content of the protective polish.
 
 
EnvioClean® steel sheet is specifically designed with self-cleaning technology for ZinEverroof profile surface where natural rain water is able to wash away dirt.
 
 
EnvioMatt® is steel sheet specifically engineered for ZinEverroof profile with stylish matt surface, suited to address the undesirable glare from sunlight.
 
COLOUR SELECTION CHART
 
Colour Selection Chart
 

Others
Warranty
Warranty Subject to application and eligibility criteria up for 30 years. There are various factors that will determine whether a building is eligible for a warranty and the duration of any applicable warranty. Such factors include, but are not limited to, product selection, environmental influences, manufacturing specifications and product specific requirements.
Accessories
 
Accessories
 
Workmanship
 
SAFETY
Always work safety when installing metal products and use extreme caution on the roof at all times. Wear gloves and safety glasses to reduce the risk of injury, and use hearing protection when operating power tools. Alaways wear smooth soft-soled shoes; avoid ribbed soles that pick up and hold small stones, swart and other objects.

CARE AND STORAGE
Store metal panels indoors when possible; if outdoors; cover and elevate. Elevate one side higher for water drainage. Never cover in plastic. If a bundle gets wet, break bands and separate sheets; allow sheets to dry completely and only restack if completely dry. Material should be used promptly (within 3 months) to avoid the possibility of a storage related corrosion.

HANDLING
It is recommended that heavy-duty cut-resistant gloves and appropriate manual handling techniques or a lifting plan be used when handling material. Handle materials carefully to avoid damage: don't drag materials over rough surfaces or each other; protect from swarf.