ZinCurve

ZinCurve consist of Full Curve Contour, Middle and Both End Curve Contour and End Curve Contour which was developed to provide versatility and creativity, giving softer look for a building and enhance its appearances and finishing.

ZinCurve Profile

Product Description

Main Advantages

Less supporting framework for ridges, fascias and parapet.
Do away with the coventional ridge capping as the roof is fully rounded at the apex.
Reduced work involved in installation of ridge capping and fascia cladding.

Material Used

ZinCurve is available in both AlumZinc and Prepainted Material. The base steel used conforms to Grade CGCH (550mPa) and the thickness of steel use varies from 25G to 28G (0.5mm-0.33mm). The minimum yield strength of min 550mPa shall apply.
AlumZinc Steel is a revolutionary zinc/aluminum alloy-coated steel with a nominal composition of 43.4% zinc, 55% aluminum and 1.6% silicon (AZ150) which conforms to AS1397 and has a clear resin coating which gives it a glowing-smooth finishing.
Self Cleaning ColorCoat is a polyester based system where silicate is added to the topcoat producing resistance surface to protect painted surface against dirt pick-up. The main purpose is to produce a self-cleaning mechanism (hydrophilic) character for its surface washable ability, which resist dirt and particles from being bonded to the surface and thus facilitate siding maintains. Self Cleaning ColorCoat offers an excellent UV resistance and balance between flexibility and hardness, thereby resistant to cracking, peeling, fading and chipping.
PVdF ColorCoat is a special high anti corrosion coating made available for high corrosive condition. The binder of this coating contains 70% Polyvinylidance Fluoride which offers a unique combination of excellent chemical resistance. The high performance fluropolyner resin with its extraordinary capacity to retain color and gloss, keeps painted metal looking vibrant and appealing.
Prepainted ColorCoat Galvanishing JIS G3312 are coated sheets through continuous Color Coating Line Process which are fully computerized and automated. It is capable of a 2-coat and 2-bake process. The coating is highgrade material with excellent adhesive and weather resistant properties.

Paint Coating System

Pretreatment : Cleaning and chemical treatment for corrosion resistant conversion coating
Primer Coat : Corrosion inhibitive Primer coating. Nominal thickness 5-10μm max on both side
Finish Coat : A variety of finish coat is available. Nominal thickness 20-25μm max
Backer Coat : Service coat on the backside. Nominal thickness 5-10μm max

Profile Diagram

MIDDLE & BOTH END CURVE

The unity of MIDDLE AND BOTH END CURVE suit directly to the pitch on both side structure with no lapping, a one piece stretched forward. c = Actual Curve Roofing Length to calculate its dimension, while a,b & e need to measure from the frame. d = dimension in feet ¸ 2.5 feet to determine number of pieces required.

END CURVE

c = Actual Curve Roofing Length to calculate c dimension, a.b and e, need to measure from the frame. The Best way to do the awning is to order Curve Roofing first before proceeding with the frame work. It is better to use standard degree of curve roofing to determine the suitable frame.