+608-565 5656
info@primasteel.com.my
Home
About Us
Services
Products
Roofing and Cladding Solution
Structure Solution
Fencing Solution
Reinforcement Concrete Mesh
Gyproc PlasterBoard
Fiber Cement Board
Building Insulations
Finishing Coat
Waterproofing Solution
Silicone Sealant
Sanitary Ware
UPVC Rain Gutter
Septic / Water Tank
Careers
Portfolio
Residential & Commercial
Contact Us
home
>
Products
>
Silicone Sealant
>
BS-500 PVC Solvent Cement
BS-500 PVC Solvent Cement
A premium quality, clear color, medium strength adhesive formulated for PVC and uPVC fitting and pipes bonding applications. It is easy to use, fast setting and offers superior bonding strength.
Please enter valid quantity.
Whatsapp
Email
Product Description
Features
Excellent Adhesion
Fast Setting
Waterproof Bonding
Packaging
100 mL/can~60/carton
500 mL/can~24/carton
15 mL x 10 tubes~48/carton
Shelf Life
12 months
Storage
Highly flammable, keep away from heat source or naked flames. Store in dry and cool place with temperature below 30 °C.
Product Specification
Appearance
Odour
Solid Content
Viscosity at 25 °C (S2, 50 rpm)
Specific Gravity
Main Solvent
Main Ingredient
Application Temperature
Service Temperature
: Clear Liquid
: Aromatic Odour
: 16 – 18%
: 200 – 300 cPs
: 0.88 – 0.92
: Hydrocarbon Solvent
: Synthetic Resin
: -10 °C to 40 °C
: -10 °C to 60 °C
Applications
Ideal for bonding and coupling of rigid PVC and uPVC pipes up to 100 mm diameter. Upon full cure, it is safe for drinking water, irrigation, waste water, sanitary pipes and conduit, etc.
Directions
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Roughen mating surfaces to the full depth of socket using medium glass paper or emery cloth.
3. Apply the solvent cement to both surfaces to be bonded with a dry, clean brush to give a uniform coating, with heavier coat at the pipe end.
4. It will dissolve and soften the surfaces of the pipes and fitting. Assemble while cement is wet.
5. When the pipes and fitting are assembled together, the softened surfaces mix and on hardening produce a chemically welded joint.
6. Hold firmly for 30 seconds to allow initial bonding, then remove surplus solvent cement and should not be disturbed for 15 minutes.
7. 12 hours for drying time should be allowed before working pressure, and 24 hours before testing to 1.5 working pressure.
Caution
Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. May cause damage to the nervous system through prolonged or repeated exposure by inhalation. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not breathe fumes. Use only outdoors or in a well-ventilated area. Wear protective gloves and eye protection. Store in a well-ventilated place. Keep cool. Store locked up. Keep out of reach of children. Safety data sheet available on request. For further health and safety information, consult the latest safety data sheet.
Frequently Purchase Together
BS-2530 Roof & Gutter Sealant
More Details
BS-2600W Seal-A-Gap
More Details
BS-2010 General Purpose Sealant
More Details
BS-2100 Glass Sealant
More Details
BS-2700 Liquid Nails
More Details